Posted by John Nichols on April 18, 2005 at 01:54:03 from 165.91.196.80 user Mcneacail.
In Reply to: Re: Ransome and Knight Stuff. posted by John Nichols on April 17, 2005 at 19:54:26:
My roves from Jamestown Distributors in Maine.
3 inch copper nail - diameter 0.15 inches - 3.8 mm
1.5 inch copper nail - diameter 0.115 inches 2.9 mm
7/16 copper roves - internal diameter 0.11 inches - 2.8 mm
3/8 copper roves - internal diameter 0.11 inches - 2.8 mm
The tool I have now found to be handiest is the verniers I bought. Only imperial but worth money.
The instructions call for #14 bronze ringshank nails - but I can not find them on the drawings. Any ideas where I use them?
JMN