Posted by John Nichols on March 08, 2003 at 19:39:21 from 165.91.199.202 user Mcneacail.
In Reply to: Re: The design of the Swallow. posted by John Nichols on March 08, 2003 at 18:36:34:
Drawings:
I have sent a set of the drawings as JPG files to David. The files are working files and as such are subject frequent change. They are 4 MBs.
A couple of other thoughts:
Scarab had an angled transom, I could be mistaken but I thought that Swallows' transom was vertical? I will need to go back and check on that.
I have inlcuded a roughly digitized version of Scarab. I wish I had PM but it is is sitting in England, waiting for Coots in the North to be printed I suspect. All curtesy of Amazonn.com.uk
Has anyone had a good look at Amazon that I could ask a few questions of?
I have also sent a copy of the hull file. You need to get a copy of the hull design program from carlsondesign.com to look at the hull program.
The manual is not bad.
and http://www.parallelgraphics.com/developer/products/cortona/help
has a plug in file cortona that will let you load the WRL file. This is a 3d look at Swallow.
She needs a pennant as well, I wish I could draw.
John